Chainsaw maintenance:
A properly maintained and sharpened chain can easily cut into wood with very little pressure.
During routine maintenance, pay attention to checking the chain links for cracks and broken rivets. Replace any damaged or worn parts on the saw chain with new parts of the same shape and size.
And if you procure electric chainsaw,we can supply extra chain,
The quality of the chain is the guarantee of cutting efficiency, so the repair and maintenance of the chain are very important.
How to maintain a chain saw?
Electric chainsaw runs fast. Taking a 3/8 saw chain as an example, the number of sprocket teeth is 7, and the speed of the chain is 13 meters per second when the engine speed is 7000 rpm during operation.
The driving force of the sprocket and the reaction force during cutting are concentrated on the rivet shaft. The working conditions are bad and the wear is serious. If you do not pay attention to maintenance, the chain will be scrapped quickly.
chainsaw chain Maintenance is carried out from the following aspects:
01
Always pay attention to lubricanting
While lubricanting frequently, it is also necessary to maintain the sharpness of the cutting edge and the symmetry of the left and right cutting teeth.
02
adjust the tightness
Adjust the tension of the saw chain frequently, not too tight or too loose. When the adjusted saw chain is lifted up by hand, there is a middle guide tooth that completely exposes the guide plate groove.
It is important to note that nicelyon electric chainsaw are free adjust,no need to use any tool.
03
Clean up on time
Clean up and clean the dirt on the guide plate groove and chain in time, because the guide plate and saw chain will be worn during sawing, and the worn iron filings and fine sand will accelerate the wear and tear, and the glue on the tree, especially the grease on the pine tree, the saw During the cutting process, the heat melts and adheres to the saw chain, which makes each joint sealed and hardened, and the oil cannot get in and cannot be lubricated, which will also accelerate the wear and tear.
It is recommended to remove the saw chain after daily use and soak it in kerosene for cleaning.
Please leave your message you want to know! We will respond to your inquiry within 24 hours!
